go back button DOWNLOAD SPECSget a quote button
sykes 12 inch pump

Jetting Pump

Jetting Pump is an exhaust primed centrifugal pump with 75mm (3") suction and discharge connections. in standard form the pump is coupled to a Lister TR3 air cooled diesel engine and is mounted on two wheeled site trailer.

Suitable for duties such as wellpoint jetting; fire fighting; jetting and extracting piling, bulkheads and sheeting; flushing and cleaning lock gates etc. In fact, anywhere that high pressure is a priority. By the use of an exhaust activated venturi system the pump is able to prime at suction lifts down to 6m (20ft) within 40 seconds.
What's it ideal for?

Wellpoint Jetting Fire Fighting
Flushing Process pumping
Pipeline testing Boosting
Jetting Cleaning
Pump Performance
3" (75mm) suction and discharge. Close coupled to lister TR3 air-cooled diesle engine mounted on 2 wheel chasis incorporating built in fuel tank.

The 3H dimensions are 2000 long x 860 wide x 1400 high and weighs 457kg excluding fuel. Maximum head 105 M, maximum flow 32 L/S.

What's so good about it?

Capable of a total head of over 100m (328ft) Rapid self priming down to 6m (20ft)
Single stage, therefore, not affected by problems associated with multistage pumps Light compact design.
Ideal for site manoeuvring
High efficiency Corrosion ressistant seal ring
Grease lubricated spring loaded mechanicle seal  
Easy maintenance  
Download the full product spec - including fuel and accessory details. Get a free quotation here. The 3H is available on flexible terms for long or short-term hire at competitive rates